• Acquiring and understanding the Project goals from Contract, specific documentation and the kick-off meeting. • Assuring technical accuracy and quality of all work performed in the electrical department. • Assigning personnel to projects with the capabilities required to successfully complete the assigned tasks. • Providing planning so that current and future manpower requirements are met. • Assist in control, update of critical electrical system data required for safe isolation and electrical system protection (protection & arc flash studies, SLD, load lists). • Supporting the review, development, improvement of the electrical maintenance job aids, work packs, method statements, procedures, QA / QC forms. • Coaching, assessment, and authorization of E&I technical staff in compliance with Electrical Safety Rules and Operational Procedures. Monitoring and resolve client issues. • Performing field investigations and evaluations of existing electrical components/systems relative to condition/ upgrade capacity and drawing compliance. • Developing methods and procedures to improve efficiency of the discipline stream. • Ensuring the achievement of assigned goals and the fulfillment of the project quality requirements and the contractual obligations. • Monitoring and reporting actual progress / check for Discipline activities. • Coordination the evaluation of the design changes to the original scope of work and verifies the implementation of those approved. • Ensuring safe operation and maintenance of electrical installations in compliance with ESRs, maintenance strategies, procedures. • Ensuring the latest Rules and requirements are understood by all within the discipline stream. • Ensuring compliance with Health, Safety & Environmental responsibilities. • Coordinating the Electrical Safety and Integrity improvement campaigns, rehabilitation, and ensuring safe and effective execution of Electrical work, testing.

• Provide consultancy in commissioning processes of electrical discipline. • Review of the project documentation and the construction schedule for electrical discipline. • Review of the plan for commissioning of electrical systems. • Verify potential risk on project completion of electrical discipline under existing project schedule.

• Reporting to the Project Manager, to manage the execution of the work packs given by planning team. • Accountable for the HSE Implementation on-site. • Accountable for the Quality execution of the work. • Accountable for the interface with other disciplines. • Responsible for the work force provided for each area of the Plant. • Responsible for the sharing workforce Day/Night shift. • Participating on the Tools evaluation and request. • Responsible to give feedback to the project management for the executed work, and for the look ahead. • Responsible to facilitate the solution of eventual problems, and to troubleshoot the activities faced by the subordinates. • Coordinating the Electrical Safety and Integrity improvement campaigns, maintenance, rehabilitation, and ensuring safe and effective execution of Electrical work, testing. • Co-operate with various departments like Engineering, Procurement, Contracts, Quality, & Commissioning. Participate in project meetings and discussions with the Client as required. • Ensuring safe operation and maintenance of electrical installations in compliance with ESRs, maintenance strategies, procedures, and following approved QC/QA forms. • Coaching, assessment, and authorization of E&I technical staff in compliance with Electrical Safety Rules and Operational Procedures. • Supporting and assisting in Electrical safety competency development, assessment, and authorization, staff advice, team building. • Ensuring compliance with the Company's HSE policy and guidelines. Carry out safety audits and inspections, and conduct Job Hazard Analysis as required. • Support and enforce the HSE project objectives and directives.

Reviewing QA/QC documentation, construction Contractor electrical procedures. Knowledge of quality processes. Responsible for installation & energizing of electrical equipment to pre-commissioning and commissioning. Inspection of the assembly including inspection of wiring and if necessary electrical operation test, dielectric test, checking of protective measures and of the electrical continuity of the protective circuits, checking of insulation resistance, test drawers(internal wiring and functional test). Witness & verification of electrical equipment testing. Proficiency different electrical and electronic measuring equipment. Monitor quality control on construction progress activities. Issued punch list for outstanding work. Reviewing & accepting test documentation. Attending meetings, writing reports and giving presentations to managers and clients. Support and enforce the HSE project objectives and directives. Taking actions whenever the persons violate rules and procedures.

Responsibilities and Duties: included giving required assistance the electrical maintenance and operations team while carrying out major maintenance activities of the various electrical equipments. Performing the works as directed, with particular emphasis on Safety, Efficiency and Quality. Work with the construction, commissioning, operations, and maintenance teams to increase and maintain the overall performance and reliability of the company facilities. Coordinate and participate in facility projects for inspection and installation of new equipment. Conduct field surveys. Provide technical support for all on-site electrical equipment. Investigate the client's complaints, determine nature and extent of problem, and recommend remedial measures. Work with various internal teams to develop key solutions and practices to improve overall facilities efficiency. Supervise and coach / mentor local workforce. Work to and stay up to date with electrical codes and standards. Inspect completed installations and observe operations, to ensure conformance to design and equipment specifications and compliance with operational and safety standards. Making sure projects meet electrical and O&M safety regulations. Raise and coordinate PTW and preparation of JSA. Duties also covered analysis of the equipments failure and history, preparation of purchase requisitions for the 2 years spare parts, updating the Maintenance work instruction when required and prepare of maintenance checklist, defining and purchasing the required electrical tools and special measurement and logging devices, following up the permit to work system and isolation activities. Overseeing inspection and maintenance programs. Attending meetings. Writing up comprehensive management reports. Safety Responsibilities: Promote safety through proactive involvement in safety training, safety programs and implementation of Electrical Safe Work Practices. Helping to project managers to conduct Health & Safety inspections in work areas. Demonstrate a personal commitment to Health, Safety and the Environment. Take actions whenever the persons violate rules and procedures. Support and enforce the HSE project objectives and directives. Support and implement the project HSE management system (plans, procedures and specification). Attend HSE meetings and training when required. Participating in job safety analysis and make safety suggestions. Report any unsafe acts or conditions observed.

Responsibilities and activity: Operations Working closely with COMPANY's site maintenance & inspection superintendents, Production, Logistic: Advises COMPANY's superintendent on monthly and annual planning. Distributes the daily activity to the supervisors as prepared by the planning team. Co - ordinates the maintenance operations. Checks and validates technical reports. Prepares maintenance reports. Informs the persons concerned, by appropriate reporting, on the progress of maintenance operations and, if necessary, of difficulties encountered. Takes part in different daily, weekly and site co-ordination meetings. Methods Ensures the appropriateness of the maintenance procedures and tools employed by crews and, if necessary, suggests improvements to Client COMPANY's maintenance superintendent. Ensures co-ordination between maintenance operations and Production, Logistic, Operation, Inspection teams. Keeps an up-to-date list of work that cannot be performed except during inspections of machines or Shutdowns. Promotes and proposes modifications and improvements. Suggests corrective measures to COMPANY if this backlog threatens to become unmanageable. Maintains a permanent anticipation on the potential problems that could occur in the production plant in close relationship with other sections, in order to prevent non-productive or non efficient operations. Team Leading Responsible for the teams on site, particularly: Ensures the correct behavior of his teams in accordance with the general safety regulations of the subsidiary and, if need be, takes the necessary corrective measures. With the assistance of CONTRACTOR base support, organizes the rotation schedules of his teams (administrative and logistical requirements, crew changes, etc.) Identifies the training needs of the teams and makes training requests as appropriate. Constantly checks the validity of individual certifications required by the PERSONNEL of CONTRACTOR. Manages the Nationalization plan and proposes all necessary adjustments. Purpose Technical representative of CONTRACTOR on site. HSE management representative for CONTRACTOR activities. Responsible for the on-site management of CONTRACTOR's O&M teams (administrative, operational, coordination, professional). Under the authority of Client COMPANY Maintenance/Inspection Superintendent, organizes and plans maintenance operations on site, whether these are carried out by own teams or by outside teams. Guarantees that the HSE rules and operating procedures in force in COMPANY are respected, as well as the regulations in force in CONTRACTOR's QNQC handbook. Safety Responsibilities: Promote safety through proactive involvement in safety training, safety programs and implementation of Safe Work Practices. Demonstrate a personal commitment to Health, Safety and the Environment. Take actions whenever the persons violate rules and procedures. Support and enforce the HSE project objectives and directives. Support and implement the project HSE management system (plans, procedures and specification). Attend HSE meetings and training when required. Participate in job safety analysis and make safety suggestions. Report any unsafe acts or conditions observed.

Responsible for prioritising actions and monitoring team resource so that deadlines are met. Duties: Direct team of up to 30 E & I staff members in the support, enhancement, and upgrade of systems. Monitor systems performance to ensure optimal operability. Carrying out daily site inspections. Work planning on the SAP R/3 CMMS. Supervise the performance of corrective maintenance (CM) and preventive maintenance (PM) tasks of electrical equipment. Verifying that work orders are completed accurately. Making sure all tasks given to staff are done on time and to the required standard. Gather requirements and specifications, estimate resource use, and create schedules / critical path milestones. Review, approval the Permit to Work (PTW), Method statements & relevant documents, certificates such as ICC, DFT, HVSFT, EWC, LOA. Allocating daily jobs and workloads. Coaching and developing the team. Training up new members of the team. Acting as a resource for other staff members. Managing team performance and progress. Enforcing all company approved policies and procedures. Constantly looking for ways to improve processes. Monitoring the performance of junior staff. Completing team-related paperwork. Implementing new initiatives and making sure all staff understand them. Taking action to correct staff shortcomings. Managing and monitoring staff attendance. Giving prompt and accurate information on individual staff member performance. Resolving any salary or overtime disputes. Controlling team budgets and expenses. Coordinating, attending and leading team meetings. Ensuring a clean, safe and friendly working environment. Communicating on a regular basis with senior managers. Reporting to senior managers. Suggest of improvements for increased efficiency and productivity. Assist in Vendor activities. Assist in the process of commissioning related to electrical, instrumentation and automation equipment. Assist in the performing the SAT test for E & I equipment. Working with all types of electrical diagrams, DRW's, P&ID, loop hook-up diagrams, cable schedule, instruments layout, manuals, etc. Diagnose, troubleshoot power system abnormalities. Controlling the testing, repair and maintenance complex electrical equipment in assigned area. The Involved equipment included: PGP equipment such as 4 x Roll-Royce RB211 Gas Turbine Packages, generators AMS 1120LK, 22 MW, 10 KV ( ABB Automation Technology), exciters and control units, Substation's electrical equipment, transformers 35/10 KV, 10/0.72KV, 10/0.42KV, LVSWGR, HVSWGR, AC/DC UPS, LV/HV motors & control circuits, Variable Speed Drive, electrical submersible pumps (ESP), electrical protection systems, process lighting, street lighting, emergency generators, emergency lighting distribution boards and electric heat tracing, etc. HVAC systems troubleshooting.

Electrical, Electrical, electronic and control engineering

Белгородский УКК, эксплуатация электроустановок потребителей

Sir Derek BIBBY Training Centre, Dynamic Positioning